Barrel tap with 3/4 inch thread and gasket made of nitrile rubber.
For the small hole in drums of different sizes and materials. There are various types of drums, tanks and containers that have this standard industrial thread.
The barrel tap can also be mounted in its own container with a 25 mm hole on a straight wall if you tighten with our lock nut on the back.
The tap is made entirely of polyethylene and FDA approved as well as the other plastic taps we sell. Food safe, resistant to most chemicals including alcohol.
The spigot is not moving when you turn on the tap. Needle valve type . A pin is screwed down / up (OFF-ON) in about 3/4 turn so that you can adjust the flow quite accurately. Stop both ways so you can not accidentally unscrew the faucet knob. The barrel tap does not have its own venting.